Tuesday, August 23, 2016
Monday, August 22, 2016
Thursday, August 18, 2016
honda odyssey 2007 noise dashboard
There are several reasons that your honda odyssey makes noise under the diashboard.
1. Bad AC ac actuator
It started as a clicking noise coming from the dashboard and I determined it was something called a vent door or blend door actuator. I am having the same issue with my 2006 and took too much of the dash apart before realizing I didn't have to. Anyway, I found that my actuator was not connected to the black track (I assume it jumped out during one of the times it got stuck). Took it out, put it back in and it only actuates between 86 and 89 degrees and when it does it actuates all the way. As I move it in one degree increments it does not appear to recognize the input. How much did you pay for the part and where did you get it? I am wondering if my issue was that it jumped out of the track and when I reinstalled it, I did not orient it properly and that is why it isn't actuating except in the 86 to 88 degree range?
It could cost anywhere from $30-$200, but you can DIY to grease it by open the plastic case with NO COST.
2007 Odyssey blend door actuator replacement.
2. If you heard a flapping sound from driver side.
Weird Ody noise from front drivers side when the car is cold. Then the problem could be the faulty Timing Belt Tensioner.
hey indicated that the hyd-tensioner is part of TB service @ their shop. Stated that to my dealership and they said, no, not here. I suggested that they offer it as an option to customers since the cost of the part is $120 and the labor for TB service is $450. Seems like a no-brainer. They wanted $770 to replace timing belt and new hyd-tensioner. After much wrangling I ended up paying $370
@ 105k miles, new TB+water pump by dealer $680. 115k miles start to hear clattering sound. now 132k miles and clattering isa embarrassingly loud. (like an engine w/ no oil) Went to an independent repair shop and he stated that the belt could slip @ any time and said he believed the problem to be hydraulic tensioner. back to the dealer... While waiting on the dealer I called 2 other Honda dealers in the area. T
Install tow hitch 2" on new NISSAN Rogue 2015
It is very easy to install the hitch. It takes one person about 20 minutes to do the job. Yes, you can DIY with basic tools only. Here is a photo of how it looks after installation.
In case you want to use the same model.
This is CURT Class 3 Trailer Hitch #13204
CURT Class 3 Trailer Hitch #13204
The CURT class 3 trailer hitch is the most common type of trailer hitch installed on full-size pickup trucks and SUVs. It is also found on full-size cars, crossover SUVs, minivans and mid-size trucks. That is because the class 3 packs the punch of a heavyweight hitch while still staying light on its feet. This CURT class 3 hitch offers a gross trailer weight capacity of 3,500 lbs. and a tongue weight capacity of 525 lbs. It is designed to be a custom-fit trailer hitch for certain years of the Nissan Rogue (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary hardware for a complete installation.
The 2" x 2" receiver tube opening of this class 3 hitch is able to accept a hitch-mounted accessory, such as a bike rack or cargo carrier, or a ball mount to tow most standard size trailers, including utility trailers, single-horse livestock trailers, boat trailers and large campers (NOTE: Never exceed the lowest weight capacity of any towing component).
CURT class 3 trailer hitches are engineered to be strong and capable, having a quality steel frame and a solid finish. They are put through strenuous testing before being deemed ready for market and come with two coatings -- a liquid Bonderite coating and a powder coat in high-gloss black -- that cure together to form a strong resistance against rust, scratching, UV damage and other wear. Our hitches are our pride, and as such, we back them up with a limited lifetime warranty and a one-year finish warranty.
Wednesday, August 17, 2016
How to disable microsoft surface book touch screen in windows 10 (WIN10) ?
Control Panel -> Device Manager -> Human Interface Devices -> HID-compliance touch screen -> Disable
There are two of the devices. So you need to disable both of them.
Interesting Pokemon go link The easy tutorial to download and install Pokemon GO to your Kindle Fire or Amazon Fire tablet. You do not need to root your device. This is confirmed working for the $49.99 Amazon Fire tablet and should work for all Fire devices running Fire OS 5 Bellini. This tutorial will show you how to download the Google Play Store to your tablet and install Google Maps (you will need this to run the game correctly) and Pokemon GO.
How to fix HVAC condenser capacitor
Deep Info About HVAC
startign:
See also: Motor controller
There are three basic types of competing small induction motors: single-phase split-phase and shaded-pole types, and small polyphase induction motors. Although polyphase motors are inherently self-starting, their starting and pull-up torque design limits must be high enough to overcome actual load conditions. In two-pole single-phase motors, the torque goes to zero at 100% slip (zero speed), so these require alterations to the stator such as shaded-poles to provide starting torque. A single phase induction motor requires separate starting circuitry to provide a rotating field to the motor. The normal running windings within such a single-phase motor can cause the rotor to turn in either direction, so the starting circuit determines the operating direction. Larger single phase motors are split-phase motors and have a second stator winding fed with out-of-phase current; such currents may be created by feeding the winding through a capacitor or having it receive different values of inductance and resistance from the main winding. In capacitor-start designs, the second winding is disconnected once the motor is up to speed, usually either by a centrifugal switch acting on weights on the motor shaft or a thermistor which heats up and increases its resistance, reducing the current through the second winding to an insignificant level. The capacitor-run designs keep the second winding on when running, improving torque. A resistance start design uses a starter inserted in series with the startup winding, creating reactance.
In certain smaller single-phase motors, starting is done by means of a shaded pole with a copper wire turn around part of the pole. The current induced in this turn lags behind the supply current, creating a delayed magnetic field around the shaded part of the pole face. This imparts sufficient rotational field energy to start the motor. These motors are typically used in applications such as desk fans and record players, as the required starting torque is low, and the low efficiency is tolerable relative to the reduced cost of the motor and starting method compared to other AC motor designs.
Polyphase motors have rotor bars shaped to give different speed-torque characteristics. The different bar shapes can give usefully different speed-torque characteristics as well as some control over the inrush current at startup. The current distribution within the rotor bars varies depending on the frequency of the induced current. At standstill, the rotor current is the same frequency as the stator current, and tends to travel at the outermost parts of the cage rotor bars (by skin effect). In wound rotor motors, rotor circuit connection through slip rings to external resistances allows change of speed-torque characteristics for acceleration control and speed control purposes.
Self-starting polyphase induction motors produce torque even at standstill. Available squirrel cage induction motor starting methods include direct-on-line starting, reduced-voltage reactor or auto-transformer starting, star-delta starting or, increasingly, new solid-state soft assemblies and, of course, VFDs.
Interesting Pokemon go link The easy tutorial to download and install Pokemon GO to your Kindle Fire or Amazon Fire tablet. You do not need to root your device. This is confirmed working for the $49.99 Amazon Fire tablet and should work for all Fire devices running Fire OS 5 Bellini. This tutorial will show you how to download the Google Play Store to your tablet and install Google Maps (you will need this to run the game correctly) and Pokemon GO.